User Manual

5-36
第五章：BIOS 程式設定
RttNom [Auto]
設定值有： [Rtt_Nom Disable] [RZQ/4] [RZQ/2] [RZQ/6] [RZQ/1] [RZQ/5]
[RZQ/3] [RZQ/7] [Auto]
RttWr [Auto]
設定值有： [Dynamic ODT Off] [RZQ/2] [RZQ/1] [Hi-Z] [RZQ/3] [Auto]
RttPark [Auto]
設定值有： [Rtt_PARK Disable] [RZQ/4] [RZQ/2] [RZQ/6] [RZQ/1] [RZQ/5]
[RZQ/3] [RZQ/7] [Auto]
Common RAS
Data Poisoning [Auto]
本項目可以啟用或關閉資料中毒。設定值有：[Disabled] [Enabled] [Auto]
DRAM Post Package Repair [Disabled]
設定值有：[Disabled] [Enabled]
RCD Parity [Auto]
設定值有：[Disabled] [Enabled] [Auto]
DRAM Address Command Parity Retry [Auto]
設定值有：[Disabled] [Enabled] [Auto]
以下的項目僅當 Data Bus Configuration User Controls 設定為 [Manual]
時才會顯示。
以下的項目僅當 DRAM Address Command Parity Retry 設定為 [Enabled]
時才會顯示。
ClkDrvStren [Auto]
設定值有：[Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm] [24.0
Ohm] [20.0 Ohm]
AddrCmdDrvStren [Auto]
設定值有：[Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm] [24.0
Ohm] [20.0 Ohm]
Cs0dtDrvStren [Auto]
設定值有：[Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm] [24.0
Ohm] [20.0 Ohm]
CkeDrvStren [Auto]
設定值有：[Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm] [24.0
Ohm] [20.0 Ohm]
Data Bus Configuration
Data Bus Configuration User Controls [Auto]
本項目可開啟或關閉經由記憶體晶片選擇交插存取存儲區。設定值有：
[Auto] [Manual]
Max Parity Error Replay [8]
十六進位的數值 1、2 或 3 為無效。設定值有：[0] – [39]