User Manual

Chapter 3: Installation Options
3-2
Rear of Enclosure
Cabinet Depth
Rear Mounting
Flange
Keep-out
Zone for Rail
Keep-out
Zone for Rail
CMA
Front of Enclosure Front Mounting Flange
2” for Handle
A
B
3.1 Rail Kit
The rail kit package includes:
2 x 1200 mm rack rails (or 2 x 1000 mm rack rails)
4 x M4X4L screws
8 x ø17.1 screws
8 x #10-32 screws
(or 10 x #10-32 screws for 1000 mm rack rails)
Rack
2 x M5X20L screws
Rear end
Front end
Rack rails
• Thebundledscrewpackageincludesdifferenttypesofscrewsforyoutochoosefrom,
notallscrewsarerequiredfortheinstallation.
• Packagecontentandspecicationsaresubjecttochangewithoutnotice.
EvenwithoutaCMA,another9”(for1200mmrackrails)or2”(for1000mmrackrails)of
additional keep-out zone should be reserved behind the inner rail. No obstructions such as
power cables or sockets should be present in this keep-out zone.
4 x #6-32X4L screws
3.1.1 Selecting rack rail cabinets
Refertotheguidebelowformoreinformationonselectingarackrailcabinetandrackrailfor
yourserversystem.
1200 mm rack rail with CMA
A=700.3mm(27.6”)~965.5mm(38”)
A+B>1125mm(44.3”)
1200 mm rack rail without CMA
A=700.3mm(27.6”)~965.5mm(38”)
A+B>1025mm(40.4”)
1000 mm rack rail without CMA
A=685.7mm(27”)~916.5mm(36”)
A+B>835mm(32.9”)