User Guide

6-24
Chapter 6: RAID Conguration
6.3 Intel
®
Rapid Storage Technology enterprise SCU/
SATA Option ROM Utility
The Intel
®
RapidStorageTechnologyenterpriseSCU/SATAOptionROMutilityallowsyou
tocreateRAID0,RAID1,RAID10(RAID1+0),andRAID5set(s)fromSerialATAharddisk
drives that are connected to the Serial ATA connectors supported by the Southbridge.
YoucancreateRAIDmodebyuseofonboardAHCISATAports.Also,wheninstalled
optionalASRKmodule,youcanuseonboardscuSASportstocreateRAIDmode.
To use onboard SATA ports:
1. InstallalltheSerialATAharddiskdrives.
2. Turningonthesystem.DuringPOST,press<Delete>toenterBIOS.Goto
Advanced
Menu
>
PCH SATA Configuration
>
SATA Mode
,thenpress<Enter>.
3. Set
SATA Mode
to
RAID Mode
andsave,thenrebootsystem.
4. DuringPOST,press<Ctrl+I>todisplaytheutilitymainmenu.
TouseSCUSATAports:
1. InstallalltheSATAharddiskdrives.
2. Turningonthesystem.DuringPOST,press<Del>toenterBIOS.Goto
Advanced
Menu
>
PCH SCU SAS Configuration
,thenpress<Enter>.
3. ConrmalltheSASharddiskdrivesyouinstalledarecorrectlydisplayed,thenreboot
system.
4. DuringPOST,press<Ctrl+I>todisplaytheutilitymainmenu.