User's Manual

4-18
Chapter 4: Web-based user interface
Alert Policy Tab
This page is used to congure the Alert Policy and LAN destination. You can add, delete or
modify an entry in this page.
The elds of PEF Management – Alert Policy Tab are explained below.
1.
Policy Entry #:
Displays Policy entry number for the newly congured entry (read-
only).
2.
Policy Number:
Displays the Policy number of the conguration.
3.
Policy Configuration:
To enable or disable the policy settings.
4.
Policy Set:
To choose any one of the Policy set values from the list.
0 - Always send alert to this destination.
1 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set.
2 - If alert to previous destination was successful, do not send alert to this destination.
Do not process any more entries in this policy set.
3 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set that is to a different channel.
4 - If alert to previous destination was successful, do not send alert to this destination.
Proceed to next entry in this policy set that is to a different destination type.
5.
LAN Interface:
To choose a particular channel from the available channel list.
6.
Destination Selector:
To choose a particular destination from the congured
destination list.
LAN Destination has to be congured - under Conguration->PEF->LAN Destination.