User's Manual
4-12
Chapter 4: Web-based user interface
Procedure
Entering the details in Advanced LDAP Settings Page
1. In the LDAP Settings Page, click Advanced Settings. A sample screenshot of LDAP
Settings page is given below.
2. To enable/disable LDAP Authentication, check or uncheck the
Enable
checkbox
respectively.
During login prompt, use username to login as an ldap Group member.
3. Enter the IP address of LDAP server in the
IP Address
eld.
a. IP Address made of 4 numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
b. Each Number ranges from 0 to 255.
c. First Number must not be 0.
d. Supports IPv4 Address format and IPv6 Address format.
4. Specify the LDAP Port in the
Port
eld.
Default Port is 389. For Secure connection, default port is 636.
5. Enter the
Search Base
. The Search base tells the LDAP server which part of the
external directory tree to search. The search base may be something equivalent to the
organization, group of external directory.
6. Click
Save
to save the settings.
7. Click
Cancel
to cancel the modied changes.