User Manual

4-6
Chapter 4: Motherboard information
4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)
This jumper allows you toselect the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
®
 Rapid Storage Technology enterprise 3.0 RAID. Place the jumper
capsoverpins1–2ifyouwanttousetheLSIMegaRAIDsoftwareRAIDUtility(default).
Otherwise,placethejumpercapstopins2–3tousetheIntel
®
RapidStorageTechnology
EnterpriseOptionROMUtility.
5. ME firmware force recovery setting (3-pin ME_RCVR1)
ThisjumperallowsyoutoforceIntelManagementEngine(ME)bootfromrecoverymode
whenMEbecomecorrupted.