User Manual

Chapter 2: Hardware setup
2-28
9. Secure the front end of the accelerator
to the bracket with one screw.
10. Repeat steps 3—9 if you need to install
a second accelerator to the bracket.
11. Align and insert the golden ngers of
the accelerator bracket into the card slot
on the motherboard. Ensure the bracket
is completely seated on the slot.
12. Attach the white end of the 4-pin power
cable to an available 4-pin power
connector in front of the accelerator
bracket.
13. Secure the thumbscrew in front of the
accelerator bracket.