User Manual

2-23
ASUS ESC4000 G2S Series
5. Carefully cut the cable tie on the SATA/
SAS cables and SGPIO cables.
6. Connect the SGPIO cable to the
SGPIO1 connector into the SGPIO2
connector on the PIKE riser card.
7. Remove the SATA/SAS cables from
the onboard SATA1, SATA2, ISAS1,
ISAS2, ISAS3 and ISAS4 connectors.
8. The SATA/SAS cables are tied and
labeled in four groups. Group 1
connects to HDD 1 and 2, Group 2 to
HDD 3 and 4, Group 3 to HDD 5 and 6,
and Group 4 to HDD 7 and 8.