User Manual
Chapter 2: Hardware setup
2-4
2. Press the left load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket pins,
do not remove the PnP cap unless you
are installing a CPU.
B
A
E
D
C
4. Press the right load lever with your thumb
(C), then move it to the right (D) until it is
released from the retention tab. Lift the
load lever in the direction of the arrow (E).
3. Slightly lift the load lever in the direction of
the arrow.
Load lever