User's Manual

華碩 ESC4000 G2 系列用戶手冊
5-15
內存設置（Memory Configuration）
Compatibility RID [Enabled]
本項目為啟用或關閉支持在 Sandybridge BIOS 規格裡兼容的 ID (CRID)。
設置值有：[Enabled] [Disabled]
Memory Mode [Independent]
本項目為選擇內存初始化的模式。設置值有：[Independent] [Mirroring]
[Lock Step] [Sparing]
DDR Speed [Auto]
強制 DDR 速度。設置值有：[Auto] [Force DDR3 800] [Force DDR3
1066] [Force DDR3 1333] [Force DDR3 1600] [Force DDR3 1866]
Channel Interleaving [Auto]
選擇不同的 channel interleaving 設置。設置值有：[Auto] [1 Way] [2
Way] [3 Way] [4 Way]
Rank Interleaving [Auto]
選擇不同的 rank interleaving 設置。設置值有：[Auto] [1 Way] [2 Way]
[4 Way] [8 Way]
Patrol Scrub [Disabled]
提供啟用或關閉 Patrol Scrub。設置值有：[Disabled] [Enabled]
Demand Scrub [Enabled]
提供啟用或關閉 demand scrubing 功能。設置值有：[Disabled] [Enabled]
Support for compatibility
Revision ID(CRID)
Functionality mentioned in
Sandybridge bios spec.
Compatibility RID [Enabled]
Memory Conguration
Total Memory 16384 MB (DDR3)
Current Memory Mode Independent
Currently Memory Speed 1333 MHz
Mirroring Not Possible
Sparing Not Possible
Memory Mode [Independent]
DDR Speed [Auto]
Channel Interleaving [Auto]
Rank Interleaving [Auto]
Patrol Scrub [Disabled]
Demand Scrub [Enabled]
Data Scrambling [Enabled]
Device Tagging [Disabled]
Thermal Throtting [CLTT]
Enable High Temp. [Disabled]
Allow 2x Refresh [Enabled]
Altitude [300 M]
Memory HOT sensor support [Disabled]
DIMM Information
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.