User's Manual

第五章：BIOS 程序設置
5-14
QPI Conguration
Memory Conguration
CPU II0 Bridge Conguration
PCH Conguration
Intel(R) VT for Directed I/O Conguration
5.4.3 芯片組設置（Chipset Configuration）
QPI 設置
Isoc [Enabled]
設置值有：[Disabled] [Enabled]
QPI Link Speed Mode [Fast]
本項目提供您選擇 QPI link speed 為 fast mode（快速模式）或 slow
mode（慢速模式）。設置值有：[Slow] [Fast]
QPI Link Frequency Select [Auto]
本項目提供您選擇 QPI 連接頻率。設置值有：[Auto] [6.4 GT/s] [7.2
GT/s (Fast Mode Only)] [8.0 GT/s (Fast Mode Only)]
QPI Link0s [Disabled]
設置值有：[Disabled] [Enabled]
QPI Link0p [Disabled]
設置值有：[Disabled] [Enabled]
QPI Link1 [Enabled]
設置值有：[Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
QPI Conguration Page
Current QPI Link Speed Slow
Current QPI Link Freq 8.0 GT/s
Isoc [Enabled]
QPI Link Speed Mode [Fast]
QPI Link Frequency Select [Auto]
QPI Link0s [Disabled]
QPI Link0p [Disabled]
QPI Link1 [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Enable/Disable Isoc
Recommended short duration power1 1.2 * Long Duraton
Short duation power limit 0
提供您以瓦數為單位來設置 short duration power limit。使用 <+> 或 <->
鍵來調整想要的數值。