User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 T1s Auth Configuration
- 4.5.14 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Save & Exit menu
- Chapter 5: Driver Installation
- Appendix
2-38
2.8 Removable/optional components
The following sections describe installation or removal instructions for the following
removable/optional components:
1. System fans
2. Redundant power supply units
3. GPUs
4. GPU bridges
5. PFR module
Ensure that the system is turned off before removing any components.
2.8.1 System fans
To uninstall the system fans:
1. Hold the system fan by the notches, then press the latch inwards to release the system
fan from the fan cage.
2. Lift the fan, then set it aside.
To reinstall the system fans:
1. Insert the fan into the fan cage and ensure that it is securely seated.
3. Repeat steps 1 to 2 to uninstall the other system fans.