User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- 2.9 Rail Kit Options
- Chapter 3: Motherboard Infomation
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 OffBoard SATA Controller Configuration
- 4.4.2 Trusted Computing
- 4.4.3 ACPI Settings
- 4.4.4 Redfish Host Interface Settings
- 4.4.5 Onboard LAN Configuration
- 4.4.6 Serial Port Console Redirection
- 4.4.7 SIO Common Setting
- 4.4.8 SIO Configuration
- 4.4.9 PCI Subsystem Settings
- 4.4.10 USB Configuration
- 4.4.11 Network Stack Configuration
- 4.4.12 CSM (Compatibility Support Module)
- 4.4.13 NVMe Configuration
- 4.4.14 APM Configuration
- 4.4.15 Third-party UEFI driver configurations
- 4.5 Platform Configuration menu
- 4.6 Socket Configuration menu
- 4.7 Event Logs menu
- 4.8 Server Mgmt menu
- 4.9 Security menu
- 4.10 Boot menu
- 4.11 Tool menu
- 4.12 Save & Exit menu
- Chapter 5: Driver Installation
- Appendix
4-50
Chapter 4: BIOS Setup
LTSSM Logger [No]
Allows you to enable or disable LTSSM Logger for PCIe functionality.
Configuration options: [No] [Yes]
The following items appear only when
LTSSM Logger
is set to
[Yes]
.
Stop [99]
Allows you to configure the Stop value for LTSSM Logger.
Configuration options: [0] - [99]
Speed [Gen 1 (2.5 GT/s)]
Allows you to configure the Speed value for LTSSM Logger.
Configuration options: [Gen 1 (2.5 GT/s)] [Gen 2 (5 GT/s)] [Gen 3 (8 GT/s)]
[Gen 4 (16 GT/s)]
Mask [FF]
Allows you to configure the Mask value for LTSSM Logger.
Jitter Logger [No]
Allows you to enable or disable Jitter Logger for PCIe functionality.
Configuration options: [No] [Yes]
IIO RC flow [Auto]
Allows you to enable or disable IIO RC flow execution.
Configuration options: [Disable] [Enable] [Auto]
The following item appears only when
IIO RC flow
is set to
[Enable]
or
[Auto]
.
IIO PCIE link training [Auto]
Allows you to enable or disable PCIE link training execution.
Configuration options: [Disable] [Enable] [Auto]
Skip Port Personality Lock [Disable]
When enabled leaves capability registers of PCI and DMI ports not locked.
Configuration options: [Disable] [Enable]
OTC Pipe Hazard Thresh [4]
Sets OTC Pipe Hazard Thresh value, 0 cycles as default and used to disable
workaround for outbound parity errors.
Configuration options: [0] - [9]
Bad Transaction Type WA [Auto]
Allows you to enable or disable M2IOSF bad transaction type workaround execution.
Configuration options: [Disable] [Enable] [Auto]
Socket 0, Device Hide Menu
Uncore Stack0-1 Devhide0-7 [0]
If entire DEVHIDEx is 0, then register will not be modified. If any byte is
non-zero, then the entire DEVHIDE register will be overridden with these
values (thus overriding any other HIDE option in setup such as PCIe port
hide questions).