User Manual

4-34
Chapter 4: BIOS Setup
4.6.2 Common RefCode Configuration
Numa [Enable]
This item enables or disables the Non uniform Memory Access (NUMA).
Configuration options: [Disable] [Enable]
Common RefCode Dfx Configuration
Displays and provides options to change the Common RefCode Dfx Settings.
RST_CPL Bits Programming [F]
Allows you to enable or disable rst_cpl bits programming. This is a 4-bit bitmask, each
bit masks to rst_cpl1, 2, 3, 4 (bit-0 maps to rst_cpl1). When the bit is zero, BIOS skips
setting the respective cpl bit.
B2P Mailbox Commands
Displays and provides options to enable or disable BOIS-to-Pcode mailbox commands.
B2P Mailbox CMD 0xXX-0xXX [FF]
Enable or disable BIOS-to-Pcode mailbox commands 0xXX-0xXX. This is
an 8-bit bitmask, bit-0 maps to CMD 0xXX, ..., bit-7 maps to CMD 0xXX.
When the bit is zero, BIOS skips issuing the respective command to Pcode.
B2P Error Assert [0]
Enter the command value to assert on if there is an error returned from B2P
command. Value 0xFF will assert on all errors.