User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 OffBoard SATA Controller Configuration
- 4.4.2 Trusted Computing
- 4.4.3 ACPI Settings
- 4.4.4 Redfish Host Interface Settings
- 4.4.5 Onboard LAN Configuration
- 4.4.6 Serial Port Console Redirection
- 4.4.7 SIO Common Setting
- 4.4.8 SIO Configuration
- 4.4.9 PCI Subsystem Settings
- 4.4.10 USB Configuration
- 4.4.11 Network Stack Configuration
- 4.4.12 CSM (Compatibility Support Module)
- 4.4.13 NVMe Configuration
- 4.4.14 APM Configuration
- 4.4.15 Third-party UEFI driver configurations
- 4.5 Platform Configuration menu
- 4.6 Socket Configuration menu
- 4.7 Event Logs menu
- 4.8 Server Mgmt menu
- 4.9 Security menu
- 4.10 Boot menu
- 4.11 Tool menu
- 4.12 Save & Exit menu
- Chapter 5: Driver Installation
- Appendix
4-31
ASUS ESC4000-E10
4.6.1 Processor Configuration
Scroll using the <Page Up> / <Page Down> keys to view more items.
Per-Socket Configuration
Allows you to change Per-Socket Settings.
CPU Socket 0 Configuration
Core Disable Bitmap(Hex) [0]
Allows you to set the Core Disable Bitmap. Set this item to [0] to enable all
cores. Set this item to [FFFFFFFFFFF] to disable all cores.
At least one core per CPU must be enabled. Disabling all cores is an invalid configuration.
Hyper Threading [ALL] [Enable]
Allows you to enable or disable the Hyper-Threading Technology function. When disabled,
only one thread per activated core is enabled. This is the software method to enable or
disable Logical Processor threads.
Configuration options: [Disable] [Enable]
Max CPUID Value Limit [Disable]
This item should be enabled in order to boot legacy OSes that cannot support CPUs with
extended CPUID functions.
Configuration options: [Disable] [Enable]
Hardware Prefetcher [Enable]
Allows you to enable or disable the mid level cache(L2) streamer prefetcher.
Configuration options: [Disable] [Enable]