User Manual

4-28
Chapter 4: BIOS Setup
Memory Error Enabling
Memory Error [Enable]
Allows you to enable or disable Memory Error.
Configuration options: [Disable] [Enable]
The following items appear only when
Memory Error
is set to
[Enable]
.
Memory Corrected Error [Enable]
Allows you to enable or disable Memory Corrected Error.
Configuration options: [Disable] [Enable]
The following item appears only when
Memory Corrected Error
is set to
[Enable]
.
Spare Interrupt [SMI]
Allows you to select Spare Interrupt.
Configuration options: [Disable] [SMI] [Error Pin] [CMCI]
PMem CTLR Errors [Enable]
Allows you to enable or disable PMem CTLR Error Reporting & Logging.
Configuration options: [Disable] [Enable]
PMem CTLR Low Priority Error Signaling [SMI]
Allows you to set the signaling for errors bucketed as Low Priority.
Configuration options: [Disable] [SMI] [ERR0# Pin]
PMem CTLR High Priority Error Signaling [SMI]
Allows you to set the signaling for errors bucketed as High Priority.
Configuration options: [Disable] [SMI] [ERR0# Pin]
Set PMem Address Range Scrub [Disable]
Allows you to enable or disable PMem DIMM Physical Address Range Scrub.
Configuration options: [Disable] [Enable]
Set PMem Host Alert Policy for Pat [Enable]
Allows you to enable or disable signaling DDRT interrupt upon receiving Uncorrectable
Error for PMem Patrol Scrub.
Configuration options: [Disable] [Enable]
Enable Reporting SPA to OS [Enable]
Allows you to enable or disable reporting SPA to OS. Only set to
[Disable]
for MCE
recovery validation.
Configuration options: [Disable] [Enable]
PMem UNC Poison [Enable]
Allows you to enable or disable PMem UNC Poison.
Configuration options: [Disable] [Enable]
Set PMem Host Alert Policy for DPA Error [Poison]
Allows you to configure to signal Poison or Viral upon receiving DIMM Physical Address
Error.
Configuration options: [Poison] [Viral]