User Manual

華碩 ESC4000-E10 用戶手冊
5-49
PCIe NTB Test Card [LAGUNA]
為 NTB PCIe Test Cards 運行 TxEq Phase2。設置值有：[LAGUNA]
[NTB]
Preset Settings
DN Tx Preset [Auto]
PCIe Downstream Tx 默認值。設置值有：[Auto] [P0 (-6.0/0.0 dB)] [P1
(-3.5/0.0 dB)] [P2 (-4.5/0.0 dB)] [P3 (-2.5/0.0 dB)] [P4 (0.0/0.0 dB)] [P5
(0.0/2.0 dB)] [P6 (0.0/2.5 dB)] [P7(-6.0/3.5 dB)] [P8 (-3.5/3.5 dB)] [P9
(0.0/3.5 dB)]
DN Tx Preset Hint [Auto]
PCIe Downstream Tx 默認值提示。設置值有：[Auto] [P0 (-6.0 dB)] [P1
(-7.0 dB)] [P2 (-8.0 dB)] [P3 (-9.0 dB)] [P4 (-10.0 dB)] [P5 (-11.0 dB)] [P6
(-12.0 dB)]
UP Tx Preset [Auto]
PCIe Upstream Tx 默認值。設置值有：[Auto] [P0 (-6.0/0.0 dB)] [P1
(-3.5/0.0 dB)] [P2 (-4.5/0.0 dB)] [P3 (-2.5/0.0 dB)] [P4 (0.0/0.0 dB)] [P5
(0.0/2.0 dB)] [P6 (0.0/2.5 dB)] [P7(-6.0/3.5 dB)] [P8 (-3.5/3.5 dB)] [P9
(0.0/3.5 dB)]
DN Tx Preset Gen4 [Auto]
Gen4 的 PCIe Downstream Tx 默認值。設置值有：[Auto] [P0 (-6.0/0.0
dB)] [P1 (-3.5/0.0 dB)] [P2 (-4.5/0.0 dB)] [P3 (-2.5/0.0 dB)] [P4 (0.0/0.0
dB)] [P5 (0.0/2.0 dB)] [P6 (0.0/2.5 dB)] [P7(-6.0/3.5 dB)] [P8 (-3.5/3.5
dB)] [P9 (0.0/3.5 dB)]
UP Tx Preset Gen4 [Auto]
Gen4 的 PCIe Upstream Tx 默認值。設置值有：[Auto] [P0 (-6.0/0.0
dB)] [P1 (-3.5/0.0 dB)] [P2 (-4.5/0.0 dB)] [P3 (-2.5/0.0 dB)] [P4 (0.0/0.0
dB)] [P5 (0.0/2.0 dB)] [P6 (0.0/2.5 dB)] [P7(-6.0/3.5 dB)] [P8 (-3.5/3.5
dB)] [P9 (0.0/3.5 dB)]
Miscellaneous Configuration
Link Re-Train [Disable]
當連接降速時啟用 Link Re-Train。設置值有：[Disable] [Enable]
EV DFX Features [Disable]
顯示 IIO DFX 設備與其他 CPU 設備，如 PMON。設置值有：[Disable]
[Enable]
Disable BIOS Done [Disabled]
設置值有：[Disabled] [Enabled]
以下的項目僅當 Gen3 Override mode 設置為 [Manual] 或 [Manual Ph3]
時才會出現。
PH3 TxEq Precursor [11]
覆蓋 Ph3 TXEQ 暫存器。
PH3 TxEq Postcursor [11]
覆蓋 Ph3 TXEQ 暫存器。
以下的項目僅當 Gen3 Override mode 設置為 [Test Card] 時才會出現。