User Manual

5-48
Chapter 5: BIOS Setup
Miscellaneous Configuration
Link Re-Train [Disable]
Enable Link Re-Train if connected at degraded speed or width.
Configuration options: [Disable] [Enable]
Port 1A-5A
Settings related to PCI Express Ports (0/1A/1B/1C/1D/2A/2B/2C/2D/3A/3B/
3C/3D/4A4B/4C/4D/5A/5B/5C/5D)
Gen3 Override mode [MgPhy]
Set specific TxEq overrides in PCIe features.
Configuration options: [MgPhy] [Manual] [Manual Ph2] [Manual Ph3] [Test
Card]
The following items appear only when
Gen3 Override mode
is set to
[Manual]
or
[Manual
Ph2]
.
PH2 TxEq Precursor [0]
Override Ph2 TXEQ register.
PH2 TxEq Cursor [24]
Override Ph2 TXEQ register.
PH2 TxEq Postcursor [0]
Override Ph2 TXEQ register.
The following items appear only when
Gen3 Override mode
is set to
[Manual]
or
[Manual
Ph3]
.
PH3 TxEq Precursor [11]
Override Ph3 TXEQ register.
PH3 TxEq Postcursor [11]
Override Ph3 TXEQ register.
The following items appear only when
Gen3 Override mode
is set to
[Test Card]
.
PCIe NTB Test Card [LAGUNA]
Execute TxEq Phase2 for NTB PCIe Test Cards.
Configuration options: [LAGUNA] [NTB]
Gen4 Override mode [MgPhy]
Set specific TxEq overrides in PCIe features.
Configuration options: [MgPhy] [MgPhyShortCh] [Manual] [Manual Ph2]
[Manual Ph3] [Test Card]
The following items appear only when
Gen4 Override mode
is set to
[Manual]
or
[Manual
Ph2]
.
PH2 TxEq Precursor [0]
Override Ph2 TXEQ register.
PH2 TxEq Cursor [24]
Override Ph2 TXEQ register.
PH2 TxEq Postcursor [0]
Override Ph2 TXEQ register.