User Manual

Chapter 3: Installation Options
3-8
1
2
ESC4000 E10 Front View
12. Once the server system is completely installed onto the rack rails, you can push or pull
on the server system a few times to ensure the sliding operation is smooth and that the
server system is properly installed into the rail racks. Secure the server system to the
rack using the bundled screws.
If the server system was not installed properly into the rack rail, it will be difficult to push
and pull on the server system, and it will also be difficult to align the screw holes used to
secure the server system to the rack.
13. For more information on the installation of the rack rails, you can refer to the manual
bundled with the rack rails.