User Manual

2-25
ASUS ESC4000 DHD G4
2.5.2 Installing an expansion card into riser card 2, 3, or 4
1. Release the two (2) thumbscrews that
secure the riser card to the chassis.
2. Firmly hold the riser card by the
indicated areas (A), then pull it up
to detach it from the PCI-E slot on
the motherboard (B).
The diagrams in this section are for reference only. Riser card 4 will be used here as an
example, but the installation steps are the same for riser card 2 or 3.