User's Manual

2-21ASUS ESC2000 G2
6. Restore the expansion card lock to its
original position. A light click indicates
that the card is locked in place.
2.8.2 Conguringanexpansioncard
After installing the expansion card, congure the it by adjusting the software settings.
1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 4 for
information on BIOS setup.
2. Install the software drivers for the expansion card.
IRQ assignments for this motherboard
A B C D E F G H
PCIEx16_1 shared – – – – – – –
PCIEx16_2 shared – – – – – – –
PCIEx16_3 shared – – – – – – –
PCIEx16_4 shared – – – – – – –
PCIEx16_5 shared – – – – – – –
PCIEx16_6 shared – – – – – – –
PCIEx16_7 shared – – – – – – –
Marvell9230 shared – – – – – – –
VIA1394 – – shared – – – – –
Asmedia USB3.0-1 – – shared – – – – –
Asmedia USB3.0-2 – – – shared – – – –
LAN1 (82574L) shared –
–
– – – –
LAN2 (82574L)
– shared – –
– – – –
SATA Controller 1 – – – shared – – – –
SATA Controller 2 – – – shared – – – –
USB 2.0 Controller 1 – – – – – – – shared
USB 2.0 Controller 2 – shared – – – – – –
HD Audio – – – – – – shared –