User's Manual

5-40 Chapter 5: RAID conguration
8. When you are nished, you will see the following screen in
Volumes
eld and you can
change related items in the
Volume Properties
eld.
5.4.2 Change Volume Type
When you are nished to create a RAID set, you can view or change related items in the
Volume Properties
eld.
To change the type in
Volume Properties
:
1. Click the SAS array items you want to change in
Volumes
eld.
2 From the
Volume Properties
eld, select
Type:RAID 1 Change type
.
3. You can change the
Name
,
Select the new volume type
, and
Select additional disks
to include in the new volume
if needed.
4. Then select the
Data stripe size
for the RAID array (for RAID 0, 10 and 5 only),
and then click
OK
. The available stripe size values range from 4 KB to 128 KB. The
following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB