User's Manual

5-20 Chapter 5: RAID conguration
UsingtheObjectscommand
To check data consistency using the
Objects
command
1. From the
Management Menu
, select
Objects
, and then select
Virtual Drive
from the
sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then press
<Enter>.
3. Select
Check Consistency
from the pop-up menu, and then press <Enter>.
4. When prompted, use the arrow keys to select
Yes
from the dialog box to check the
drive.
5. When checking is complete, press any key to continue.