User's Manual

5-10 Chapter 5: RAID conguration
UsingNewConguration
When a RAID set already exists, using the
NewConguration
command erases the
existing RAID conguration data. If you do not want to delete the existing RAID set, use the
View/AddConguration
command to view or create another RAID conguration.
To create a RAID set using the
NewConguration
option:
1. From the
Management Menu
, select
Congure>NewConguration,
and then press
<Enter>.
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Conguration And Start A New Conguration
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
LSI Software RAID Conguration Utility Ver C.05 Apr 5, 2012
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2. Follow step 2 to 9 of the previous section:
UsingEasyConguration
.
3. Select
Size
from the
Virtual Drive
menu, and then press <Enter>.
4. Key-in the desired virtual drive size, and then press <Enter>.
5. Follow step 10 to 14 of the previous section:
UsingEasyConguration
to create the
RAID set.
Management
Congure
Initialize
Objects
Rebuild
Check Consistency
LSI Software RAID Conguration Utility Ver C.05 Apr 5, 2012
BIOS Version A.10.09231523R
D N L I N
D N L I N
E a s y C o n f i g u r a t i o n - A R R A Y
Virtual Drive(s) Congured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
V i r t u a l
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size:
Enter VD Size: 152146_
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option