Configuration Guide
Table Of Contents
- Safety information
- Revision history
- Chapter 1: Product introduction
- Chapter 2: Components
- 2.1 Upgrading CPU and CPU heatsink
- 2.2 Upgrading system memory
- 2.3 Upgrading hard disk drives
- 2.4 Replacing hard disk drive cage
- 2.5 Installing ASUS PIKE SAS RAID card
- 2.6 Upgrading 5.25-in drives
- 2.7 Installing ASUS Server Management Board
- 2.8 Upgrading graphics card
- 2.9 Installing MIO Audio card
- 2.10 Upgrading front system fan
- 2.11 Rackmount rail kit
- 2.12 OS support list
Chapter 2: Components2-10
2.7 Installing ASUS Server Management
Board
ASMB4-iKVM
• Monitor the running status of major components via LAN or Serial Port, such
as CPU and memory utilization, storage capacity and networking transfer rate.
• Advanced server management functions including “remote power on/off/reset”,
“remote control via SOL (Serial-over LAN)” and “remote SEL (system event log
reading when the system is out-of-band)”.
• Support Dynamic Host Conguration Protocol (DHCP), which avoids
manually assigning IP address by setting DHCP mode to receive IP address
automatically.
Use the LAN1 or LAN3
(dedicated) ports for server
management.
Order P/N Description
90-C1SD80-00UAN00Z ASMB4-iKVM Module (6 in 1)
LAN1 port
LAN3 port