User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 Redfish Host Interface Settings
- 4.5.3 AMD CBS
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 CPU Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 SATA Configuration
- 4.5.13 APM Configuration
- 4.5.14 AMD Mem Configuration Status
- 4.5.15 T1s Auth Configuration
- 4.5.16 Third-party UEFI driver configurations
- 4.5.17 Driver Health
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Appendix
4-41
4.11.1 System Event Log
Allows you to change the SEL event log configuration.
Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
4.11.2 BMC network configuration
The sub-items in this configuration allow you to configure the BMC network parameters.
DM_LAN/Shared LAN
Configuration Address source [Previous State]
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
IPv6 Support [Enabled]
Configuration options: [Enabled] [Disabled]
The following items appear only when IPv6 Support is set to [Enabled].
Configuration Address source [Previous State]
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
Configuration Router Lan1/Lan2 Address source [Previous State]
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
VLAN Support [Previous State]
Configuration options: [Previous State] [Enabled] [Disabled]
4.11.3 View System Event Log
This item allows you to view the system event log records.