User Manual

2-27
2.6.3 Installing an OCP 3.0 card
To install an OCP 3.0 card to the lower left PCIe expansion card bracket:
1. Remove the server tray from the server chassis. For more information, see the
Removing the server tray
section.
2. Remove the upper PCIe expansion card brackets from the server tray. For more
information, see the
Removing the upper PCIe expansion card brackets
section.
3. Remove the lower PCIe expansion card brackets from the server tray. For more
information, see the
Removing the lower PCIe expansion card brackets
section.
4. Place the lower left PCIe expansion card bracket on a level surface.
5. Push the slot cover lock outwards, then remove the PCIe slot cover.
Lower left PCIe expansion card bracket