User Manual

4-41
4.11 Event Logs menu
The Event Logs menu items allow you to change the event log settings and view the system
event logs.
4.11.1 Change Smbios Event Log Settings
Press <Enter> to change the Smbios Event Log configuration.
All values changed here do not take effect until computer is restarted.
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
The following item appears only when Smbios Event Log is set to [Enabled].
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging
activation during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Choose options for reactions to a full Smbios Event Log.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Code [Enabled]
This option allows you to enable or disable logging of the EFI Status Codes.
Configuration options: [Disabled] [Enabled]
The following item appears only when Log EFI Status Code is set to [Enabled].
Convert EFI Status Codes to Standard Smbios Type [Disabled]
This option allows you to enable or disable converting of EFI Status Codes to
Standard Smbios Type (Not all may be translated).
Configuration options: [Disabled] [Enabled]
4.11.2 View Smbios Event Log
Press <Enter> to view all Smbios event logs.