User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 T1s Auth Configuration
- 4.5.14 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-29
4.7.1 Processor Configuration
Per-Socket Configuration
Allows you to configure per-socket settings.
Hyper Threading [Enabled]
Allows you to enable or disable the Hyper-Threading Technology function. When disabled,
only one thread per activated core is enabled. This is the software method to enable or
disable Logical Processor threads.
Configuration options: [Disabled] [Enabled]
Skip Flex Ratio Override [Disabled]
Allows you to skip flex ratio overrides to use power-on default flex ratio values. In multi-socket
systems, this will allow mixed flex ratio limits.
Configuration options: [Disabled] [Enabled]
Check CPU BIST Result [Enabled]
Allows you to check or ignore BIST results. If enabled, cores with failed BIST results will be
disabled.
Configuration options: [Disabled] [Enabled]