User Manual

4-38
User Password
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, enter a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, enter the current password, then press
<Enter>.
3. From the Create New Password box, enter a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window, then press <Enter>.
Secure Boot
Secure Boot [Disabled]
Secure Boot can be enabled if the system is running in User mode with enrolled
platform Key (EPK) or if the CSM function is disabled.
Configuration options: [Disabled] [Enabled]
Secure Boot Mode [Custom]
Allows you to set the Secure Boot selector.
Configuration options: [Standard] [Custom]
Install Default Secure Boot Keys
Allows you to load the default secure boot keys.
Clear Secure Boot Keys
Allows you to delete all previously applied secure boot keys.
Key Management
Allows you to configure Key Management options.