User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 T1s Auth Configuration
- 4.5.14 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-35
Data Scrambling for PMem [Auto]
Allows you to enable or disable data scrambling for PMem. If set to Auto, data scrambling will
be enabled or disabled depending on stepping.
Configuration options: [Disabled] [Enabled] [Auto]
Data Scrambling for DDR4/5 [Enabled]
Allows you to enable or disable data scrambling for DDR4/5.
Configuration options: [Disabled] [Enabled]
Enable ADR [Enabled]
Allows you to enable or disable ADR. Automatically enabled if fADR is enabled.
Configuration options: [Disabled] [Enabled]
Outlier Check Mapout [Enabled]
Configuration options: [Disabled] [Enabled]
Outlier Threshold Modifier [0]
Allows you to modify the base outlier threshold.
Memory Topology
Displays memory topology with DIMM population information.
Memory Map
Allows you to configure memory mapping settings.
Memory RAS Configuration
Allows you to configure memory RAS settings.
PMem Configuration
Allows you to configure PMem settings.