User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 T1s Auth Configuration
- 4.5.14 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-33
MSR Lock Control [Enabled]
Allows you to lock or unlock MSR 3Ah and CSR 80h.
Configuration options: [Disabled] [Enabled]
PPIN Control [Unlock/Enabled]
Allows you to enable or disable PPIN Control.
Configuration options: [Lock/Disabled] [Unlock/Enabled]
AES-NI [Enabled]
Allows you to enable or disable the AES-NI support.
Configuration options: [Disabled] [Enabled]
PSMI Configuration
Allows you to configure PSMI settings.
Processor CFR Configuration
Allows you to configure Processor CFR settings.
4.7.2 Common RefCode Configuration
Virtual Numa [Disabled]
Allows you to enable or disable virtual non-uniform memory access (NUMA).
Configuration options: [Disabled] [Enabled]
4.7.3 Uncore Configuration
Uncore General Configuration
Allows you to configure Uncore General settings.
Uncore Per Socket Configuration
Allows you to configure Uncore Per Socket settings.