User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.2 Trusted Computing
- 4.5.2 PSP Firmware Versions
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 AMD CBS
- 4.5.5 APM Configuration
- 5.5.6 Onboard LAN Configuration
- 4.5.7 Serial Port Console Redirection
- 4.5.8 CPU Configuration
- 4.5.9 PCI Subsystem Settings
- 4.5.10 USB Configuration
- 4.5.11 Network Stack Configuration
- 4.5.12 CSM Configuration
- 4.5.13 NVMe Configuration
- 4.5.14 AMD Mem Configuration Status
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
4-39
ASUS ESC N4A-E11
SATA Controller DevSlp
Socket1 DevSlp
Socket1 DevSlp0 Enable [Auto]
Only Sata0 on each IOD/socket supports DevSlp.
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Socket1 DevSlp0 Enable is set to [Enabled].
DevSleep0 Port Number [0]
Allows you to set DEVSLP port 0.
Configuration options: [0] - [7]
Socket1 DevSlp1 Enable [Auto]
Only Sata0 on each IOD/socket supports DevSlp.
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Socket1 DevSlp1 Enable is set to [Enabled].
DevSleep1 Port Number [1]
Allows you to set DEVSLP port 1.
Configuration options: [0] - [7]
SATA Controller SGPIO
Sata0 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata0.
Configuration options: [Disabled] [Enabled] [Auto]
Sata1 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata1.
Configuration options: [Disabled] [Enabled] [Auto]
Sata2 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata2.
Configuration options: [Disabled] [Enabled] [Auto]
Sata3 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata3.
Configuration options: [Disabled] [Enabled] [Auto]
Sata4 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata4.
Configuration options: [Disabled] [Enabled] [Auto]
Sata5 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata5.
Configuration options: [Disabled] [Enabled] [Auto]
Sata6 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata6.
Configuration options: [Disabled] [Enabled] [Auto]
Sata7 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata7.
Configuration options: [Disabled] [Enabled] [Auto]