User Manual

第三章：BIOS 程序設置
3-30
Aggressor Static Lane Select Upper 32 bits [0]
設置值有：[0] - [99999999]
Aggressor Static Lane Select Lower 32 bits [0]
設置值有：[0] - [99999999]
以下項目僅當 Aggressor Static Lane Control 設置為 [Enabled] 時才會出
現。
Data Eye
Pattern Select [PRBS]
設置值有：[PRBS] [SS0] [Both]
Pattern Length [3]
可能選項為 N=3...12。設置值有：[3] – [9]
Aggressor Channel [1 Aggressor Channel]
默認值為 [Disabled]。設置值有：[Disabled] [1 Aggressor Channel] [3
Aggressor Channels] [7 Aggressor Channels]
Aggressor Static Lane Control [Disabled]
設置值有：[Disabled] [Enabled]
Target Static Lane Select Upper 32 bits [0]
設置值有：[0] - [99999999]
Target Static Lane Select Lower 32 bits [0]
設置值有：[0] - [99999999]
Target Static Lane Select ECC [0]
設置值有：[0] - [9]
Aggressor Static Lane Select ECC [0]
設置值有：[0] - [9]
Aggressor Static Lane Value [0]
設置值有：[0] - [9]
Target Static Lane Control [Disabled]
設置值有：[Disabled] [Enabled]
以下項目僅當 Target Static Lane Control 設置為 [Enabled] 時才會出
現。