User Manual

Table Of Contents
第三章:BIOS 程序設置
3-28
以下項目僅當 PMU Pattern Bits Control 設置為 [Manual] 時才會出現。
Max Write CRC Error Replay [8]
十六進位的數值 1、2 或 3 為無效。設置值有:[0] – [39]
Disable Memory Error Injection [True]
設置值有:[False] [True]
ECC Configuration
DRAM ECC Symbol Size [Auto]
設置值有:[x4] [x8] [x16] [Auto]
DRAM ECC Enable [Auto]
本項目可以啟用或關閉 DRAM ECC。設置為 Auto 會啟用 ECC。設置值
有:[Disabled] [Enabled] [Auto]
DRAM UECC Retry [Auto]
本項目可以啟用或關閉 DRAM UECC Retry。設置[Disabled]
[Enabled] [Auto]
Security
TSME [Auto]
設置值有:[Disabled] [Enabled] [Auto]
Data Scramble [Auto]
設置值有:[Disabled] [Enabled] [Auto]
以下項目僅當 DRAM Write CRC Enable and Retry Limit 設置為 [Enabled]
時才會出現。
Phy Configuration
PMU Training
DFE Read Training [Auto]
開啟 DFE 並運行 2D Read Training。設置值有[Disabled] [Enabled]
[Auto]
FFE Write Training [Auto]
開啟 FFE 並運行 2D Read WriteTraining。設置值有:[Disabled] [Enabled]
[Auto]
PMU Pattern Bits Control [Auto]
設置值有:[Auto] [Manual]
PMU Pattern Bits [0]
設置值有:[0] - [9]
DRAM Memory Mapping
Chipselect Interleaving [Auto]
本項目可開啟或關閉經由內存芯片選擇交插存取存儲區。設置值有:[Disabled]
[Auto]