User Manual

3-15
華碩 ESC N4A-E11 使用手冊
Prefetcher settings
L1 Stream HW Prefetcher [Auto]
本項目可以啟用或關閉 L1 Stream HW 預取。設置值有：[Disable] [Enable]
[Auto]
L1 Stride Prefetcher [Auto]
設置值有：[Disable] [Enable] [Auto]
L1 Region Prefetcher [Auto]
設置值有：[Disable] [Enable] [Auto]
L2 Stream HW Prefetcher [Auto]
本項目可以啟用或關閉 L2 Stream HW 預取。設置值有：[Disable] [Enable]
[Auto]
L2 Up/Down Prefetcher [Auto]
設置值有：[Disable] [Enable] [Auto]
Core Watchdog Timer Interval [Auto]
設置值有：[21.461s] [10.730s] [4.364s] [2.681s] [1.340s] [669.41ms]
[334.05ms] [166.37ms] [82.53ms] [40.61ms] [20.970ms] [10.484ms]
[4.241ms] [2.620ms] [1.309ms] [654.08us] [326.4us] [162.56us] [80.64us]
[39.68us] [Auto]
Core Watchdog Timer Severity [Auto]
本項目可以用來指定 CPU watch dog timer 的嚴重性。設置值有：[No Error]
[Transparent] [Corrected] [Deferred] [Uncorrected] [Fatal] [Auto]
RedirectForReturnDis [Auto]
設置值有：[Auto] [1] [0]
Core Watchdog
Core Watchdog Timer Enable [Auto]
本項目可以啟用或關閉 CPU Watchdog Timer。設置值有：[Disable] [Enable]
[Auto]
以下項目僅當 Core Watchdog Timer Enable 設置為 [Enabled] 時才會出
現。