User Manual

3-44
Chapter 3: BIOS Setup
Socket-0 P2 End Lane [95]
Allows you to set the NTB End Lane on Socket-0 P2 Link.
Configuration options: [80] - [95]
Socket-0 P2 Link Speed [Auto]
Allows you to select the Link Speed for Socket-0 P2.
Configuration options: [Max Speed] [Gen 1] [Gen 2] [Gen 3] [Auto] [Gen 4]
Socket-0 P2 NTB Mode [Auto]
Allows you to select the NTB Mode for Socket-0 P2 Link.
Configuration options: [Auto] [NTB Disabled] [NTB Primary] [NTB Secondary]
Socket-0 P3 NTB Enable [Auto]
Allows you to enable NTB on Socket-0 P3 Link.
Configuration options: [Auto] [Enable]
The following items appear only when Socket-0 P3 NTB Enable is set to [Enabled].
Socket-0 P3 Start Lane [112]
Allows you to set the NTB Start Lane on Socket-0 P3 Link.
Configuration options: [112] - [127]
Socket-0 P3 End Lane [127]
Allows you to set the NTB End Lane on Socket-0 P3 Link.
Configuration options: [112] - [127]
Socket-0 P3 Link Speed [Auto]
Allows you to select the Link Speed for Socket-0 P3.
Configuration options: [Max Speed] [Gen 1] [Gen 2] [Gen 3] [Auto] [Gen 4]
Socket-0 P3 NTB Mode [Auto]
Allows you to select the NTB Mode for Socket-0 P3 Link.
Configuration options: [Auto] [NTB Disabled] [NTB Primary] [NTB Secondary]
Soc Miscellaneous Control
ABL Console Out Control [Auto]
[Disable] Disable ConsoleOut Function for ABL.
[Enable] Enable ConsoleOut Function for ABL.
[Auto] Keep default behavior.
The following items appear only when ABL Console Out Control is set to [Enable].
ABL Basic Console Out Control [Auto]
[Disable] Disable Basic ConsoleOut Function for ABL.
[Enable] Enable Basic ConsoleOut Function for ABL.
[Auto] Keep default behavior.