User Manual

3-34
Chapter 3: BIOS Setup
The following item appears only when xGMI Max Link Width Control is set to [Manual].
xGMI Max Link Width [1]
[0] Set max xGMI link width to x8.
[1] Set max xGMI link width to x16.
APBDIS [Auto]
[0] Not APBDIS (mission mode)
[1] APBDIS
[Auto] Auto
DF Cstates [Auto]
Allows you to enable or disable DF C-states.
Configuration options: [Disabled] [Enabled] [Auto]
CPPC [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
HSMP Support [Auto]
This option allows you to enable or disable HSMP support.
Configuration options: [Disabled] [Enabled] [Auto]
DLWM Support [Auto]
This option allows you to enable or disable DLWM support.
Configuration options: [Disabled] [Enabled] [Auto]
BoostFmaxEn [Auto]
[Auto] Use the default Fmax.
[Manual] User can set the boost Fmax.
The following item appears only when Boost FmaxEn is set to [Manual].
BoostFmax [0]
Allows you to specify the boost Fmax frequency limit to apply to all cores
(MHz).
EDC Current Tracking [Disable]
The generation of a correctable MCE when the telemetry current value is over
the set threshold defined by EDC Current Tracking Current Threshold.
Configuration options: [Disable] [Enable]
The following items appears only when EDC Current Tracking is set to [Enable].
EDC Tracking Current Threshold [0]
The current threshold in AMPs for EDC Current Tracking feature.
EDC Tracking Report Interval [1]
Reporting interval. Every nth observed excursion results in SMU logging a
correctable MCE.