User Manual

3-32
Chapter 3: BIOS Setup
ACS Enable [Auto]
AER must be enabled for ACS enable to work.
Configuration options: [Disable] [Enable] [Auto]
PCIe ARI Support [Auto]
This item enables Alternative Routing-ID Interpretation.
Configuration options: [Disable] [Enable] [Auto]
PCIe ARI Enumeration [Auto]
Allows ARI Forwarding for each downstream port.
Configuration options: [Disable] [Enable] [Auto]
PCIe Ten Bit Tag Support [Auto]
This item enables PCIe ten bit tags for supported devices. [Auto] = [Disabled].
Configuration options: [Disable] [Enable] [Auto]
HD Audio Enable [Auto]
Configuration options: [Disabled] [Enable] [Auto]
SMU Common Options
Determinism Control [Manual]
[Auto] Use the fused Determinism.
[Manual] User can set customized Determinism.
The following item appears only when Determinism Control is set to [Manual].
Determinism Slider [Power]
Configuration options: [Auto] [Power] [Performance]
Fan Control
Fan Table Control [Auto]
[Auto] Use the default fan table.
[Manual] User can set customized fan table.
The following item appears only when Fan Table Control is set to [Manual].
Low Temperature [0]
Allows you to set the low temperature in °C.
Medium Temperature [0]
Allows you to set the medium temperature in °C.
High Temperature [0]
Allows you to set the high temperature in °C.
Critical Temperature [0]
Allows you to set the critical temperature in °C.
Low Pwm [0]
Allows you to set the low Pwm from 0-100.
Medium Pwm [0]
Allows you to set the medium Pwm from 0-100.
High Pwm [0]
Allows you to set the high Pwm from 0-100.