User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Onboard LAN Configuration
- 3.5.7 Serial Port Console Redirection
- 3.5.8 CPU Configuration
- 3.5.9 PCI Subsystem Settings
- 3.5.10 USB Configuration
- 3.5.11 Network Stack Configuration
- 3.5.12 CSM Configuration
- 3.5.13 NVMe Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Third-party UEFI driver configurations
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Exit menu
- Chapter 4: Driver Installation
- Appendix
ASUS ESC N4A-E11
1-11
1.7.3 Storage device status LEDs
SATA/SAS HDD LED Description
GREEN ON SATA/SAS/NVMe storage device power ON
RED ON
Stroage device has failed and should be swapped
immediately (for HBA/RAID card)
GREEN/RED Blinking RAID rebuilding (for HBA/RAID card)
GREEN/RED Blinking Locate (for HBA/RAID card)
GREEN/RED OFF Storage device not found
GREEN Blinking Read/write data from/into the SATA/SAS/NVMe HDD
HDD1
Red LED
Green LED
1.7.4 Rear panel LEDs
LED Display status Description
Power LED ON System power ON
Location LED
OFF
ON
Normal status
Location switch is pressed
(Press the location switch again to turn off)
Q-code/Port 80 LED
Location button with LEDPower button with LED