User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Onboard LAN Configuration
- 3.5.7 Serial Port Console Redirection
- 3.5.8 CPU Configuration
- 3.5.9 PCI Subsystem Settings
- 3.5.10 USB Configuration
- 3.5.11 Network Stack Configuration
- 3.5.12 CSM Configuration
- 3.5.13 NVMe Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Third-party UEFI driver configurations
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Exit menu
- Chapter 4: Driver Installation
- Appendix
ASUS ESC N4A-E11
1-3
1.3 System specifications
The ASUS ESC N4A-E11 Series servers features the ASUS KMPN-U16 server board that
supports AMD EPYC™ 7003 series processors.
(continued on the next page)
Model Name ESC N4A-E11
Processor
AMD EPYC™ 7003 series processors (min. 32 cores/up to 280W)
GPU
- SKU 1: HGX A100 4-GPU 40GB(160GB total) 400W
- SKU 2: HGX A100 4-GPU 80GB(320GB total) 500W
(Liquid Cooling solution for 500W support)
Memory
Total Slots
16
Capacity
Maximum up to 4,096GB
Memory Type
DDR4 3200/2933 RDIMM/LRDIMM/LRDIMM 3DS
* Please refer to www.asus.com for latest memory AVL update
Memory Size
64GB, 32GB, 16GB (RDIMM)
128GB, 64GB (LRDIMM)
256GB, 128GB, 64GB (LRDIMM 3DS / 3DS RDIMM)
* Please refer to www.asus.com for latest memory AVL update
Expansion
Slots
Total PCI/PCI-X/
PCI-E/PIKE Slots
3
Slot Type
1 x PCIe x16 slot (Gen4 x16 link , FH, FL) or
OCP3.0 NIC socket (optional)
2 x PCIe x16 slots (Gen4 x16 link, LP, HL)
Disk
Controller
SATA/SAS
Controller
Optional Kits:
- ASUS PIKE II 3008 8-port SAS 12Gb/s HBA Card
- ASUS PIKE II 3108 8-port SAS HW 12Gb/s RAID Card
Support SATA 6Gbps / SAS 12Gbps
NVMe Controller
Optional Kits:
- Broadcom MegaRAID 9560-16i card
Default supports 2 x NVMe
M.2
1 x M.2 socket Gen 4 x4 link, up to 2280
Networking
LAN
2 x RJ45 10G LAN ports (Intel
®
X710 10GbE LAN controller)
1 x RJ45 1GbE IPMI
Graphic
VGA
Aspeed AST2600
Front I/O ports
1 x USB 3.2 Gen 1 port
Rear I/O ports
2 x USB 3.2 Gen 1 ports
1 x VGA port
1 x COM port
2 x RJ45 10G LAN ports
1 x RJ45 1G Mgmt LAN ports
Switch/LED
Front:
1 x Power switch/LED
1 x Location switch/LED
1 x Storage device access LED
1 x Message LED
2 x LAN LED