System information

7
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
MTA Configuration
Overview
Setup and configuration of the MTA can be managed via a Web Browser interface and a
command line interface. In order to access these interfaces, your PC must be configured
properly as outlined previously. If you have not completed the steps outlined in the Before
you Begin section, please do so before proceeding the following.
The MTA needs two IP addresses, one is for WAN (External Port) and one is for LAN
(Internal Port). The internal port has already been configured. The IP address used by the
"WAN" is the IP assigned by your ISP. This address may be assigned by either DHCP or
Static IP.
Configuring MTA via Web User Interface
Logging In
To login the Web User Main page, follow these steps:
Table 3. Web User Interface - Logging in
Step Action
1
Open your web browser and enter the IP address of the MTA.
192.168.99.1 is the default address. The Login Dialogue Box as
shown in
XFigure 4X appears.
2
Enter your Username and Password.
NOTE: The default User Name is "Admin" and Password is
"adminpass".
3
Click OK.
Figure 4. MTA Login Dialogue Box