System information

46
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Short Form: mac
Command Usage: mac
Command Action: Displays the cable interface MAC address.
EXAMPLE:
MAIN> mac
CM MAC address is 00-10-99-01-E5-49
MAIN>
status
Command Name: status
Short Form: st
Command Usage: st
Command Action: Displays the current status of the modem. The modem can be in one of
the following states (as defined in the DOCSIS standard):
Table 16. status Command Parameters Modem Status Description
Modem Status Description
IP_COMPLETE IP connectivity has been established
NOT_READY While booting and after reset of the TNETC4042, for
example, while scanning
NOT_SYNC Modem is not locked on a downstream channel
OPERATIONAL Modem is registered and forwarding data
OTHER
PARM_ACQUIRED DHCP parameters have been acquired
PARM_TRANSFER_COMPLETE Configuration file has been loaded from the TFTP
server
PHY_SYNC PHY is locked on a downstream channel
RANGING_COMPLETE Initial ranging has been completed
REGISTRATION_COMPLETE Registration process is completed
SECURITY_ESTABLISHED Baseline privacy keys have been exchanged
TOD_ESTABLISHED Time of Day has been established
EXAMPLE:
MAIN> st
MODEM STATUS - OPERATIONAL
MAIN>
ipable
Command Name: ipcable
Short Form: ip
Command Usage: ip
Command Action: Displays the IP address of the cable interface, as acquired by the DHCP
process.
EXAMPLE: