System information

44
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Command Name: tuner
Short Form: tu
Command Usage: tu <frequency >
Command Action: Forces the tuner to try to lock on a desired frequency. The modem resets
its PHY parameters and tries to find a QAM signal on the frequency entered. Frequency is
expressed in MHz and can include a decimal point (for example, 507.25 MHz means
507,250,000 Hz). If the modem does not find a valid signal on the requested frequency, it
continues the scanning process.
EXAMPLE:
MAIN> tu 669
MAIN> Trying to synchronize ...
Tuning to frequency 669000000Hz, (us 2 mode 2)
Downstream Locked - Collecting Upstream Information
Starting Ranging On Channel 2
SYNCHRONIZED - 669000000 Hz , ucd 2
Trying to register through CMTS...
DHCP - parameters acquired
Time of day - retrieved
Registration file - downloaded
REGISTRATION COMPLETE - MODEM IS ACTIVE
Working in SNMP V1/2c Only NmAccess mode
telmta
Command Name: telmta
Short Form: tel
Command Usage: telmta <telnet MTA>
Command Action: starts Telnet simulator to telnet to InnoMedia MTA. Users will be
asked to input MTA’s username and password to login. When you ready to log out, use the
"E" command to exit from MTA and return to cable modem’s main menu.
EXAMPLE:
MAIN > telmta
IM: MSG_SESSION_COMM Transmitted
Application & Vendor report level disabled.
TelMTA session started.
IM: SesnMsg (MSG_SESSION_ACK): typ 1b
1100 03af 0012 0650 1b0e 420c 0000 0961
72ef 13f6 0000 0000
Enter Username: Admin
Enter Password: adminpass
Help
I: Show System Information
Ih: Show Hardware Information
C: Configuration: IP Information
Cf: Get the current IP Information
Ci: Re-Configure the IP Information
Cv: Configure VLAN Setting
D: Debug Information
D0: Disable Debugging
D1: Enable Debugging