System information

43
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
(+level) and OFF (-level) each class. Class 27 turns on (+27) or off (-27) all the classes.
The following list of classes is displayed when using the repl 0 command:
NOTE:
 This feature has no influence on cable modem performance.
 After power on, all report levels are set to OFF by default.
 The modem may continue to display messages even though the rep –27
command has already been entered. The messages are shown until the buffer is
cleared.
EXAMPLE:
MAIN> rep 0
MAIN> rep 0
Report levels ON: 29 30
1 CPU Usage 16 CableNet
2 TCB 17 Bridge
3 Upstream 18 IP Apps
4 Hardware 19 Statistics
5 Management 20 Main S.M.
6 Advanced PHY 21 Root
7 Registration 22 CM Messages
8 Sync 23 RSA
9 BLP 24 SNMP
10 TSM 25 IGMP
11 Downstream 26 Security
12 US Sniffer 27 ALL
13 DS Sniffer 28 TurboDOX
14 QoS 29 Application
15 DSX 30 Vendor
MAIN>
scanmode
Command Name: scanmode
Short Form: sc
Command Usage: sc <mode >
Command Action: When the mode is set to 0, the CM stops scanning downstream
channels. When this mode is set to 1, the CM performs the scan of the downstream
channels. After typing sc 1, scan mode is enabled but the CM does not start scanning. To
restart the scanning, you must force the modem to try to lock on a certain frequency by
using the tuner command.
EXAMPLE:
MAIN> sc 0
Scan mode - OFF
MAIN> sc 1
Scan mode - ON
MAIN>
tuner