System information

40
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
Auto-upgrading MTA Software Code from Server Side
MTA can be upgraded automatically via provisioning process. To perform the procedure,
follow these steps:
Table 15. Upgrading MTA Software Code
Step Action
1
Upload the new firmware to the correct directory on the provisioning
server.
2
Change firmware to the intended version in the configuration file
3
Configure your MTA:
• Use the "Me, 3" command to enable and configure
provisioning mode (see page
X30X)
• For HTTP provisioning – use "Me, 8" to configure the
Domain Name or IP address for the provisioning server. For
TFTP provisioning – use "Me, b" to configure provisioning
server name, default directory, interval, and encryption key
(see page
X30X).
• Use the "R" command to reboot your MTA
4
MTA will grab the configuration file from the server at the interval
set.
5
MTA will compare the file it has with the one specified in the
configuration. If the file name is different, MTA will request the
new firmware image from the server.