System information

39
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
MTA Firmware Updates
Overview
InnoMedia is dedicated to continually improving the quality and features of MTA. This
entails regular upgrades to the Digital Signal Process code (DSP) and to the Controller
codes. The following section describes the procedure for uploading MTA Firmware
through Web interface, or an external FTP server to the unit.
Manually Uploading MTA Firmware via Web Interface
To upload the MTA Firmware through the Web interface, follow these steps:
Table 14. Uploading MTA Firmware by Web Interface
Step Action
1
Open your web browser and type the IP address of your MTA.
2
Enter your Username and Password.
3
When the MTA’s Configuration Web page appears, click on
Management, and then Firmware Upload. Select the item you want to
upgrade (See
XFigure 18. Firmware UpgradesX):
 System Image: for system image upgrade.
 Boot-loader: for Redboot.
4
Click Browser button to select the image file, or enter directly the
location and the file name.
Figure 18. Firmware Upgrades