System information

July 2006 - InnoMedia

InnoMedia Confidential

CONNECTING YOUR WORLDS

Please REENTER your NEW Password:*********

Writing to Flash, please wait...

Writing to Flash is done successfully.

NOTE: If the password is lost, you may press the system restore button of the unit to

restore to factory default user name and password.

Configuring the Endpoint Name (Mx)

Use the "Mx" command to configure the endpoint name of each line.

NOTE: Explicit can support up to 128 alphanumeric characters.

UMx

The Endpoint Names are Automatic

Set Endpoint Name to be Automatic[0] or Explicit[1]:1

Select line[1-4]('F' to finish)1

Enter Endpoint Name: aaln/1

OK for Line 1, Name: aaln/1

Select line[1-4]('F' to finish)2

Enter Endpoint Name: aaln/2

OK for Line 2, Name: aaln/2

Select line[1-4]('F' to finish)F

Do you want to save it to Flash? (Y/N)

Writing to Flash, please wait...

Writing to Flash is done successfully.

Change has been written to Flash, please reboot System!

Pinging a Remote IP Address (P)

Use the "P" command to ping a remote IP address from the MTA.

SAMPLE:

Do you want ping a remote IP address from this MTA?[y/n]

input remote IP address...

Example: 192.45.6.4

172.16.1.66

IP address entered: 172.16.1.66

echo delay is 0 ms