System information

July 2006 - InnoMedia

InnoMedia Confidential

CONNECTING YOUR WORLDS

Configuring the Voice Volume (Mr)

Use the "Mr" command to change your MTA’s voice volume. You may adjust the volume

downwards by entering the absolute value in dB. MTA only supports negative dB values.

The recommended value is "0" dB

SAMPLE:

UMr

Current RX Gain level is 0

Current TX Gain level is 0

Do you want to change these configuration? [y/n] y

Please enter RX gain Variant (-2_-18)db:-

Please enter TX gain Variant (-4_-18)db:-5

Do you want to store the changes permanently? [y/n] y

INFO: read from NVS_PRIMARY (0x425)

INFO: write to NVS_SECONDAR

INFO: write to NVS_PRIMARY (0x426)

flash writing is done.

Testing SNMP Trap Messages (Mt)

The “Mt” command is used to test different TRAP messages. The test results can be

viewed by a sniffer application.

SAMPLE:

UMtU

Test SNMP trap functions

1 test trap TRAP_FLASH_ERROR

2 test trap TRAP_SW_FORCE_DOWNLOAD

3 test trap TRAP_SYSTEM_RESET_BY_SNMP_MANAGER

4 test trap TRAP_SYSTEM_RESET_BY_CONSOLE

5 test trap TRAP_LINE_SELF_TEST_ERROR

6 test trap TRAP_DSP_ERROR

7 test trap TRAP_SOFTWAREUPGRADE

Changing Password (Mw)

Use the "Mw" command to change your Username and Password used to login and

administer the MTA.

SAMPLE:

UMwU

Please input your NEW Username:InnoMedia

Please input your NEW Password:*********