System information

31
July 2006 - InnoMedia
© 2006 InnoMedia. All rights reserved.
InnoMedia Confidential
CONNECTING YOUR WORLDS
b. Setting "x-fresh" bullet packet format
c. TFTP Provisioning Server
d. Disable packetcable provision configuration file hash
check
Do you want to change [1-9,a-e/N]
Me Configuration Description
1. DHCP = select this option to enable/disable DHCP.
2. SW_UPGRADE = feature not yet available
3. For HTTP Provisioning
• d: Secure-VSP(9768) - secure and encryption type RC4. Need InnoMedia utility
programs to encrypt configuration file.
For TFTP Provisioning
• b: sec_tftp(762) - secure or non-secure
4. DHCP Options 43 enable/disable = enable or disable Option 43
5. DHCP Option 12 and 15 = select 1 to take DHCP Option 12 (Host
Name) and 15 (Domain Name)
6. BPI Header = select 0 for not to take BPI
7. Provisioned Maximum Waiting Delay = enter provisioned maximum waiting delay in
seconds.
8. HTTP Provisioning Server = follow the prompts to enter the Domain
Name/IP address and the port number of the
HTTP server.
9. Endpoint bullet packet = enter the bullet timer in seconds (enter 0 to
disable it).
b. Bullet transaction Id = enter the bullet transaction Id (refer to your
firewall product manual).
c. TFTP Provisioning Server = follow the prompts to configure the TFTP
provisioning server name, default directory,
provisioning interval, and encryption key.
 TFTP Provisioning Server Name = enter the TFTP provisioning
server name or IP address.
 TFTP Provisioning Default Directory = the directory location of the
configuration file for TFTP
download.
 TFTP Provisioning Interval = the time interval in seconds
before consecutive provisioning
interval
 TFTP Encryption Key = enter the encryption key if one is
used.
d. Packetcable provision configuration file hash check
= enable or disable packetcable provision
configuration file hash check.